For those who are seeking prosthetic limbs, or just require a little bit of robotic gripper help, the choices are very few and very costly. A newcomer to the area is hoping to change the costly part with their door opening arm. Costing only $2,000 to build, it is quite cheap compared to the other offerings. This arm can grip, twist, and swing its arm at the same time using a single motor thanks to a slip clutch.
[via Poular Science]
We know that feeling, you’ve been up all morning working hard, and now you just want to relax. What better way than to sit back and watch as helpless electronic devices are stripped, forced to show their goods, then put back together only hap hazardly – not that we’re into that or anything. Today, we had one thing on our mind, game systems.
With the release of Pokémon HeartGold and SoulSilver shoppers were also given a device called the PokéWalker. A pedometer that helps your pocket monster gain experience and affection towards you. Here is a tear-down of the device next to Nintendo’s other try at getting children active, the Activity Meter pedometer. [Thanks Arty2]
Sega, while in todays day all we see is more and more rip offs of everyone’s favorite Hedgehog, we do remember a time when you brought more to the game field, especially with your advanced consoles. It does bring a tear to our eyes seeing this beast being torn apart, but its all for the best.
Those keeping up with Nintendo’s DS series will notice one thing, the console keeps getting smaller and smaller. That trend continued until the (Japan) release of the DSi LL. Some think its size can be attributed to an easier to see screen, others feel its jam-packed with more features. Make your own decision after seeing its tear-down. [via engadget]
Finally, we couldn’t decide what a fourth tear down should be, and couldn’t just leave with only three. So how about 10 separate Sony gadgets torn apart!
It’s hard to believe we missed this one from a couple of years back but we’re thankful that reader [Christian] tipped us off about it. This a Nintendo DS with two tablet pc screens being used as an external display. He’s using an FPGA but not to emulate the processor. It is translating the video data from the DS board into usable signal for the larger LCD screens. In the video after the break you can see that pen input has been implemented, with the FPGA sending location data back to the DS.
[Neal], the creator, priced the project out at around $580. It’s worth a lot more considering the know-how needed to get the video scaling and pen input right using the FPGA. It won’t fit in your pocket, but it doesn’t have a case either so it’s not going anywhere anytime soon.
Pay close attention. At roughly 36 seconds we see Asimov’s laws going out the window. We’re pretty sure we saw this little autonomous battle bot take a shot at a human. We can’t tell for sure, but it looked like it enjoyed it too.
This bot is being built by [xdream] to compete in the Mech Warfare section of the Robo Games 2010. His target acquisition system and firing are completely autonomous. We think his motion is controlled by an operator though.
This little fellow may seem harmless enough, until you realize that those servos and guns could be replaced and this “little guy” becomes that “big fella”. That’s not anything the maker suggested, we’re just pointing out that a killer robot is only cute when it’s small.
[via BotJunkie]
Yes, we know, this is not a hack, yet it just has the vibe of something we’ll likely be seeing in many small form-factor systems and wearable hacks in the future.
The USB Wireless Handheld Keyboard is a diminutive keyboard and mouse replacement with a passing resemblance to a BlackBerry PDA — where the screen has been replaced with a laptop-style trackpad sensor. This seems a shoo-in for home theater PC use; it’s unobtrusive and won’t look out of place on the coffee table alongside the universal remote. But any tiny system requiring only occasional input could likely benefit.
The keyboard layout is funky as heck, though likely adequate for its intended use of couch web-surfing and interactive messaging (or whatever wild applications our readers will surely come up with). A USB wireless receiver and a charging cable are included in the $62 package. Video after the break…
[Incudie] tipped us off about a method to fix a borked HDD in your Xbox 360. Many of the one million consoles banned earlier in the month also had the hard disks scrambled making off-line gaming impossible as well. It turns out that this is caused by having a ban flag in the NAND chip on the motherboard. It has been discovered that because of wear levelling, the NAND will have two copies of the “secdata.bin” file which stores the ban flag. Please note, this will NOT allow the console to use Xbox Live, it just re-enables the HDD.
The quick and dirty of the fix is as follows: First the NAND is dumped from your Xbox 360 to a computer. After verifying the file, it can be opened in a HEX editor and the two copies of “secdata.bin” located. Once identified by date, the older version is injected on top of the newer to overwrite the ban flag.
Looks like this is not for the faint of heart, but if you got banned for modding in the first place this should be easy to pull off.
Update: Looks like xbox-scene now has a collection of apps to help you with this process. [Thanks CollinstheClown]
The chill of autumn is upon us, and with it comes the awkward sport of trying to work touch-sensitive phones and gadgets with gloved fingers. One can try toughing it out with fingerless gloves, or we’ve seen some costly solutions in the forms of specialized gloves and capacitive-compatible styluses, but sometimes simple is best: all it takes is a few stitches of conductive thread in the fingertips.
Conductive thread is available from various sources; SparkFun Electronics comes naturally to mind, but most vendors carrying the LilyPad Arduino will stock a suitable thread as well. Don’t fret if you’ve never sewn before — just a few simple loops are required, and it doesn’t need to be especially tidy. In principle this should work for trackpads and capacitive mice as well, if you use those in the field. For multitouch devices, add a separate conductive bit to each fingertip.
[via Lifehacker]
Tomorrow’s turkey day here in the United States. Do you fully expect your trashy neighbor to burn down his house while trying to cook a holiday feast? To see what’s in store for your neighborhood we’ve rounded up a great collection of idiots deep frying turkeys. Read the rest of this entry »
How would you like to have a 3-axis accelerometer, pressure sensor, temperature sensor, RF wireless, and an LCD screen in a development package? What if we told you that you can have it in the form factor of a wristwatch offering from Texas Instruments? How much would you pay for such a device? Quit guessing, you can pick it up for just $49 with an estimated delivery in mid-February of next year.
Our tip-line has been packed with emails about this since it was announced on Monday. The device ships with the firmware to serve as a sports watch with heart rate monitor. The price is pretty good just for that functionality but this package also includes a USB programming and emulation dongle so that you can develop your own firmware. It looks like the included development software is written for Windows but we’re hoping you can get it running on other platforms as well.
The LCD is a segment display, so you won’t see DOOM running on board. That said, we expect your first project to turn this into a wireless controller using the buttons and accelerometer.
If you watched the video before reading the article (like we did) and started shaking in your boots at a voice controlled lock system, prepare to be disappointed. His spoken commands are actually to his son to press the appropriate keys on a keypad off screen, the lock is not actually voice controlled.
But still, [Michael Krumpus'] door lock is pretty astounding. By using a torn apart CD drive he easily attains a nice fast and smooth linear motion to bolt and unbolt his door. It wont open his door like some locks we’ve seen, but it will probably be added sometime in the future…right alongside voice commands.
[via DVICE]
[Alpay] sent in this project he did recently. He was hired to produce a kiosk that would stand out to the kids at the event. He chose to make a bike riding game utilizing open source hardware and software. There was some thought put into what interface to use to make it easiest for people to just pick up and use. The ultimate decision was a simple one. Use real handle bars from a bike. As for software, they used Blender, the open source 3d creation program. The actual control is done via a pair of Arduinos, an accelerometer, and a pair of XBee modules.
He notes that blender is fully capable of accepting the serial input from the controller, but they opted to have the controller mimic keystrokes to make life easier on the developer, as well as make the controller usable on more games. Maybe if enough people ask really nice, he’ll release the source code for the controller.
Before we begin, let us soothe those first dreaded thoughts. No, the commodore was not destroyed in the process. They can simply clip the 16 wires they added to interface the keyboard and be back to stock. Breathe a sigh of relief, and enjoy the twypper, a twitter wall made from a commodore SQ1000.
[Alex] needed to make an interesting project for his companies Openspace/hack day. A friend, suggested a twitter wall, and that’s when [Alex] got the idea for a typewriter. After a quick search, he found oomlaut’s typewriter. They didn’t let that deter them from making their own version though. They found a nice fully functional commodore SQ1000 and began hacking. Ultimately they simply decided to use an Arduino to short the key switches to simulate typing. There are all kinds of details on the necessary steps to get the typing to function absolutely correct on the project page. Over all it was well done and we’re happy to see that it can be undone just as easily.
We were wary at first when the email came in with the headline “SparkFun is having a free day” and figured surly this is in relation to recent events? But no, after 7 years of loyal customers, SparkFun is simply giving back to the community.
It’s interesting to think that without their services, we wouldn’t have some of the amazing hacks we introduce every day. Such as the DIY mood lamp, or Cell phone alt-variometer, or Arduino iPod remote control. And their free day will allow some disadvantaged hackers the ability to finally flex that muscle sitting between their shoulders. What do you plan to make?
Mark your calendars folks, On January the 7th 2010 SparkFun is giving every household a $100 (until they reach $100k), if that’s not an incentive to wake up early, what is?
As a side note, do you think we’ve had enough posts about SparkFun lately?
[Thanks Diego]
Sometimes we miss that old Etch a Sketch we had when we were kids. The challenge of producing a decent image using those two knobs was always fun and frustrating at the same time. This project lets us recreate this interface on our computer. The Hack a Sketch is a combination of an Etch a Sketch style input and a processing sketch to recreate the experience. They’re using an Arduino to interpret the inputs and feed it to the computer via USB. We really like this thing. Simplify the electronics and we could see this as a neat toy for sale somewhere like Thinkgeek.
[via hacked gadgets]
Cable management is a headache for all, and if unmitigated it becomes a playground for cats. [kws103] posted a project a while ago that takes care of the messy wires for electronics on pull out shelving. Channel bracket is used to house the cables and has been articulated in three places to facilitate the movement of the sliding shelf. For an added touch an outlet was built into the surface to make it easy to unplug and remove the components if necessary. The hinges for articulation use aluminum base plates and rely on rivets as a pivot point, something that might need improvement if pulling the shelf in and out is a common occurence. Add this to the Ikea based solution we looked at in August and your days of electronic rats nests may be coming to an end.
A complete microcontroller development kit for little more than the cost of a bare chip? That’s what STMicroelectronics is promising with their STM8S-Discovery: seven dollars gets you not only a board-mounted 8-bit microcontroller with an decent range of GPIO pins and functions, but the USB programmer/debugger as well.
The STM8S microcontroller is in a similar class as the ATmega328 chip on latest-generation Arduinos: an 8-bit 16 MHz core, 32K flash and 2K RAM, UART, SPI, I2C, 10-bit analog-to-digital inputs, timers and interrupts and all the usual goodness. The Discovery board features a small prototyping area and throws in a touch-sense button for fun as well. The ST-LINK USB programmer/debugger comes attached, but it’s easy to crack one off and use this for future STMicro-compatible projects; clearly a plan of giving away the razor and selling the blades.
The development tools are for Windows only, and novice programmers won’t get the same touchy-feely community of support that surrounds Arduino. But for cost-conscious hackers and for educators needing to equip a whole classroom (or if you’re just looking for a stocking stuffer for your geeky nephew), it’s hard to argue with seven bucks for a full plug-and-play setup.
[thanks Billy]
The Stimmmopped is an electronic guitar tuner made to be used as a guitar pick. This uses two LEDs synchronized to blink at the exact frequency of the string you are tuning. Pluck the string with the corner of the PCB and then shine the light on the string you are tuning. As the vibrating string moves back and forth it will only pick up the spot of light when the frequency matches that of the blinking LED. Once in tune, both red lights will appear to be constantly illuminated and immobile on the string.
An Atmel ATmega8 is used to control the device, interfacing with two buttons and a seven-segment display to choose the pitch currently being tuned. Gibson has a robotic guitar that features an auto-tuning mode, but if you don’t want to shell that much this low cost and simple build is for you.
[Thanks Sören]
[Jonathan Ward's] pcb mill is as impressive as it is inexpensive. Twenty-six plywood parts, labeled A-Z, are used to assemble the machine along with the customary precision rods, stepper motors, and router assembly. His bill of materials prices the unit at $458.18, a small price to pay in order to forgo a multi-step etching process.
His test board shows some fairly fine pitch that could turn out most home-project circuit boards. We’ve contacted [Jonathan] regarding the specifics of milling the plywood parts out of a 2 foot by 4 foot sheet of plywood. Watch for an update with any information he’s willing to share. We hope he’ll make the milling files for the plywood parts available so that you can build a copy of the device for your own use.
[Thanks Charles]
While we have our fun ethically hacking, its very easy to forget that sometimes our ideas could be used with malicious goals. Take for instance SparkFun’s BlueSMiRF – the device’s original intention is simply to act as a wireless serial cable replacement. After hackers discovered several PIN pads use a serial interface, they put one and one together to steal several hundreds of people’s personal bank accounts.
It seems SparkFun is getting a lot of heat lately, but we’re glad they stand up and address these issues. You can check out the original news clipping here.
Move over Steve and PEART… there’s yet another robotic drummer in town. [Fauzii] tipped us off to his own MIDI-controlled creation – WizardFingers. According to him, WizardFingers is already capable of 64th note rolls at over 250 beats per minute. That’s on every drum simultaneously. Each drum is hit with a lever attached to a linear pneumatic actuator. A laptop running MAX/MSP generates MIDI sequences, which are sent to Doepfer MTC64 board. All of these actuators are hooked up to the board, which sets them off in sequence.
[Fauzii] ultimately hopes to develop AI software that will allow WizardFingers to compose its own tunes on not only a drum kit, but bar chimes and an organ as well. His site documents the whole concept quite well (just watch out for wild cats).
Read more...On The Road is an extremely flexible template with flexible multiple columns (2, 4, 5, 6, or 7 columns). You can change the columns, all background and font colors, and font types without doing any coding.
| Download (55.9 KB) |
Werd is an extremely flexible template with flexible multiple columns (2, 4, 5, 6, or 7 columns). You can change the columns, all background and font colors, and font types without doing any coding.
| Download (56.1 KB) |
Snowy Winter is an extremely flexible template with flexible multiple columns (2, 4, 5, 6, or 7 columns). You can change the columns, all background and font colors, and font types without doing any coding.
| Download (56.1 KB) |
Webnolia design is inspired by the award-winning #1 Indian technology blog Digital Inspiration by Amit Agarwal.
It is a minimalist and extremely flexible template with flexible multiple columns (2, 4, 5, 6, or 7 columns). You can change the columns, all background and font colors, and font types without doing any coding.
| Download (56.3 KB) |
Simple n' Sweet is a minimalist and extremely flexible template with flexible multiple columns (2, 4, 5, 6, or 7 columns). You can change the columns, all background and font colors, and font types without doing any coding.
| Download (54.6 KB) The wide sidebar is 300 px wide, perfect for square Adsense boxes. The two narrow sidebars are 132 px wide. All the 3 lowerbar columns are 250 px wide. Comment Box To have your comment box function properly, go to Settings > Comments, look for the Comment Form Placement and click on the 'Embedded below post' button. That's all you have to do if you use this template. The codes have already been modified for you. See this post for more detail. Features
Help links: template installation guides and instructions. Header Image To put the header image in your blog, click on the image below to open up a larger size and save it into your computer. Then, upload the image using the Layout > Page Elements > Header Edit tab. If you want to use your own image for the header, the image width has to be 980 pixels (with any height).  |
That title’s a mouthful but you’re already familiar with the technology and application of foot pads as sensors in games like Dance Dance Revolution. The usbddr project sought to make a USB connected DDR controller from scratch. The microcontroller used is an Atmel ATmega8 running the V-USB firmware for connectivity and uses the analog to digital converts to read in data from the capacitive sensors.
The physical implementation is cleaver. The base plate has a capacitor plate attached to the top of it and the tile has the other capacitor plate attached to the bottom of it. The two are separated by some weather-stripping which is spongy enough to allow compression, bringing the two capacitor plates together.
We’re not convinced of the long-term durability of the system. We certainly don’t think it will hold up to very much hard-core DDR playing. But we would love to see a Super Mario RPG style puzzle to unlock the door to the ‘castle’ at a child’s birthday party.
[Thanks Hans]
The folks at The Geek Group built a camera crane for less than $1000. In the video embedded after the break a presenter takes you through the different parts that make up the boom and how it is operated. This feels like something from a Junkyard Wars challenge as most of the parts are scavenged or from an industrial surplus store. Don’t let that sour your opinion, what they’ve ended up with is amazingly functional.
The base of the unit is a rolling tripod used for television cameras from around the 1960’s. The aluminum boom attaches to the base with a few large bearings and features a fine tuning balance system. The camera mount is motorized and can be moved using a joystick or set to scan automatically. It’s nice to see more examples of custom camera mounts. Obviously this isn’t a build for everyone, but as cameras and camera equipment become more readily available it makes high quality video production available for the masses, not just the networks.
mbed is a next-generation 32-bit microcontroller platform. It’s a prototyping and teaching tool somewhat along the lines of Arduino. On steroids. With claws and fangs. Other contenders in this class include the MAKE Controller, STM32 Primer and Primer 2, Freescale Tower, and Microchip’s PIC32 Starter Kit. The mbed hardware has a number of advantages (and a few disadvantages) compared to these other platforms, but what really sets it apart is the development environment: the entire system — editor, compiler, libraries and reference materials — are completely web-based. There is no software to install or maintain on the host system.
Read the rest of this entry »
[Gio] enjoys using vacuum tubes in his projects. He designs the circuits using a CAD program but was finding that there is no substitute for actually building a prototype before heading to a final design. To make this process easier, he built his own tube prototyping station.
At the top of the board he’s got three different sizes of tube sockets with the pins from each wired as common. The nine pins from the sockets break out to a terminal strip where they can be interfaced with a solderless breadboard. For added versatility he’s included terminals to tap into some RCA jacks, as well as a 100 kOhm variable resistor. We’d bet this is not something that you can find ready-made, but it sure does look a whole lot better than a workbench full of components alligator-clipped together.
[Ania] wrote in to let us know her team had finished the Multixylophoniomnibus and that they have posted an extensive writeup about it. We covered this augmented xylophone when it was still in development at the beginning of this month. Originally they wanted to use mallets wrapped in tinfoil as switches that close when they contact the metal keys, something akin to matchbox cars as a switch. This plan was thwarted when they realized the paint surface insulated the metal keys. At this point they switched to piezo sensors which turned into an odyssey of trial and error to achieve a reliable input for the Arduino to monitor. In the end they got it working with around forty lines of code, interfacing six boxes containing a different type of noisemaker.
See the finished instrument played in the video after the break. Alas, the addition of the piezo sensors do impede the resonance of the xylophone keys, but we still like it! There’s something reminiscent of the beginning of Pink Floyd’s Money when this is played.
How often do you change the batteries in your television remote control? Yeah, basically never. But that’s a tribute to how efficient the device is and not a reason to overlook this development. NEC is showing off a remote control that uses no batteries. Power is generated using the piezo effect that occurs when a button is pushed. That is to say, when a crystal is compressed it emits a tiny bit of electricity which is harnessed and used to power this device. This is the same principle that is used in the electricity producing sidewalks tested in Japan.
It’s pretty phenomenal that they can run the device using this method. Right now there’s only a handful of buttons but we’re sure there’ll be advances in the technology. There’s a ton of use for this if it can be miniaturized. It is using radio frequency instead of infrared, making it a useful development in wireless doorbells, garage door openers, key-less entry fobs for your car, and many more applications.
[Thanks das_coach]
[Maurice] let us know that his latest photography tool for hackers, the Camera Axe 3.0, is now available. The original allowed you to trigger a high-speed flash and camera from a multitude of sensors, including light and sound. The new one does all that, but also: allows multiple cameras or multiple flashes, clean up of software to make it more user adaptable, and the best (arguably the most important) part – cheaper components! All that and more under the Creative Commons that we do love so much. Keep up the amazingly detailed and just pure awesome work [Maurice].
As you can see above, there is no wiimote in that accessory steering wheel. There is, instead, a home-made accelerometer controller that connects to the pc via USB. Based around a PIC 18F2550 and a 2 axis accelerometer, this device is detected by windows as a standard controller. The schematic and source code are available on his website. He says it can also be used as a “motion mouse”. You can see a video of that after the break.
When we first saw the video, we thought it might be the same person as the accelerometer controlled maze project, due to the wiimote steering wheel casing.
[Shingo] shared his implementation of a stationary bike as a virtual reality interface. This is similar to the Google Street View setup we covered a week ago but goes a few steps further. They patched into the bike computer to pick up rotation of the bicycle wheel and added an accelerometer for directional control. This setup can navigate through Street View but the video after the break also details an interface with Google Earth and even the ability to navigate through Second Life, following your avatar as it bikes along with you. The use of a wearable display is far superior to something like the SurfShelf and really gives you a goal other than just some cold-weather exercise. So take this idea, patch it into a wearable computer and you’ve got the exercise setup worthy of the future world we’ve been promised.
This neat accelerometer controlled marble maze adds a level of fun to retrieving a gum ball. You have to first navigate the maze using a controller that has a dual axis accelerometer in it to control the angle of the platform. Though that does look like a wii accessory, there is no wiimote in there. Only after you have completed it will the gum ball machine dispense the candy. [Dan] constructed everything himself, which might explain the lack of “pits” for the marble to fall into in the maze.
More details on the build and source code are available on his page.
[via hacked gadgets]
Read more...[Jack] wrote in to let us know about a project that creates a virtual microprocessor core based on the ATmega103 by using a Field-Programmable Gate Array. Great, we thought. Here’s another rather esoteric project like the NES on a FPGA, but what’s the motivation behind it? We asked [Jack] and he provided several scenarios where this is quite useful.
Implementing the AVR core allows code already written for the chips to be easily ported to an FPGA without a code rewrite. This way, if your needs outpaced the capabilities of the microcontroller long after the project has started, you can keep the code and move forward from that point with the added capabilities of the gate array. Having the core already implemented, you then only need to work with HDL for the parts of the project the AVR was unable to handle. He also makes the point that having an open source AVR core implementation provides a great tool for people already familiar with AVR to study when learning VHDL.
With products like the Butterfly that this project is based around, or the Maple we’ve seen in the past, programmable logic for the recreational hacker is starting to get a little easier.
[David Cranor] has managed to fit a fully working Uzebox system into an old NES controller. Uzebox, an open source gaming platform based on the ATmega 644 and an AD725 NTSC encoder, is one of a couple systems that are becoming more and more widespread and accessible. There are a number of ready-to-go Uzebox kits available, but for the more hands-on types, [David] has been very generous with his schematics and step by step instructions. These schematics can all be readily reshaped, and would easily fit into controllers with less fun applications and sentimental value.
[Chris] wanted a guitar with a keyboard but didn’t want a keytar. Like any good hacker he took a cheap guitar and a small keyboard and introduced them to each other. He moved the control knobs to make room for the keyboard and added the control circuitry from the keyboard to the top of the guitar’s body. A 9v battery is used to power the keys and something called “Chris Collins’ transformer trick” is used to amplify its sound. If you know details on this transformer, leave a comment and we’ll update the post. Take a look at the video after the break to see [Chris] perform the Final Countdown on keys and guitar.
The guitar is a Chinese made Telecaster clone and we think he’s the first one to find a realistic use for keyboards that don’t use full-sized keys. [Chris] apologizes for the lack of build photos but we give him a pass; he lost his phone while crowd-surfing and that’s as good an excuse as any for losing some pictures. We can’t wait to see another performance with this gnarly axe once he’s had enough practice to pull everything together!
Today we stumbled upon [jimthree's] Seismic Reflector while looking at projects that employ the Processing language we mentioned a few days ago. Utilizing a Boarduino and some vibration motors from a game controller, the Seismic Reflector does just as its name implies – rattles itself around whenever there is an earthquake. While this does seem a bit silly at first, we were fascinated to learn there have been 165 earthquakes just in the past week and almost no news reports, suddenly this device got a lot more interesting!
[Robotkid249] details how to build a wireless power transmission system. This is similar to the commercial applications we have seen in a TED talk as well is in a Sony prototype. Power is fed to a ring made of magnet wire. A smaller loop is attached to the system that you want to power and picked up from the base unit. In this case, he is powering some LEDs but the concept can be tailored for your purposes such as an inductive charging pad. We’d like to see a hack that incorporates the base into a mouse pad (or the desk itself) and the receiver into the body of a wireless mouse. We’ve seen a commercial solution along these lines but we want one that doesn’t require a physical connection for power transfer.
[Thanks Juan]
While Outerspace may not have an extremely useful function, being an art installation, we really enjoyed reading through the build information. Basically, Outerspace is supposed to appear to be curious, exploring it’s surroundings and reacting to your contact. We do enjoy a little bit of personality in robots, so this seems like it could be fun. The head has 5 photo sensors and each piece of the “arm” has capacitive sensors. This allows Outerspace to sense what is going on. The motion itself is controlled by 4 servos in the base pulling cables that run through the body.
The programming seems like it could use a little work to achieve the effect of being “curious”, but we see potential here. You can see a video of it in action here.
[via today and tomorrow]
If you’re marooned on a desert island, you want to have a Professor who can build useful items out of coconuts. [LostMachine] is one of those guys, and he’s currently building a land-loving pirate ship. The wacky vehicle will use the giant wheel above to propel the vessel while the captain sits comfortably in the lofty crow’s nest. A crack-pot concept? Not really, he plans to take this to Burning Man where it will be a fairly useful build compared to the folks who have really gone off the deep end.
The story here is the build quality. Take some time to watch his videos which we’ve embedded after the break. In the first, he details his method for creating a precisely level building surface on top of his uneven driveway. This is accomplished by welding supports in a circle that are level compared to the center point. He goes on to share his liquid-cooling system for cutting the pipe supports with a custom-built jig and an old windshield washer water system pump from an RV (second video). The final video shows the construction of the wheel which came in with 2000 welds and about 250-300 hours of construction time.
If you hadn’t guessed, [LostMachine] is a structural engineer. Unfortunately he was laid-off this spring which has put a damper in his building schedule. We hope that with a quality project like this in his portfolio a new job is just around the corner for him.
[Texane] wrote in to let us know he has implemented AVR ISP programming using a PIC microcontroller. He wrote some code for an 18F4550 that uses the STK500 standard for In System Programming. This means that his hardware is compatible with AVRdude, the open source AVR programming software. There has long been an argument over the virtues of PIC versus AVR but we say why not both? If you have already honed your programming chops with PIC, you can build your own programmer and give the Atmel family a try.
The current implementation uses a serial port to connect the programmer to a computer. Keep your eye on this one as [texane] plans to add USB connectivity and has told us he will post schematics for the device as soon as that is complete.
[NeZoomie] built an RGB mood lamp as his first electronics project. He certainly hit it out of the park with this one, ending up with a design so clean it could be a commercial product. The controller is an Arduino board (further proof that this is a fantastic entry-level platform) that interfaces with 8 RGB LEDs. He’s built an enclosure out of thick polypropylene that does a great job of diffusing the light and adding a stylish look. The control system features a rotary potentiometer from SparkFun and what he calls a tilt-potentiometer of his own design after drawing inspiration from Hack a Day.
Blinky things are fun and that’s why we see a lot of mood lamps around here. Take a look at the video after the break and if you’ve got the parts, give this one a try!
We’re sure you’ve heard about Xbox 360s facing an other round of bans from Xbox Live last week. It seems that living in a hole, or even in Grenora, North Dakota couldn’t help you escape hearing this from every news source possible. Apparently, this has caused a slew of banned consoles to go up for sale in a buyer-beware quagmire. This is a joke in several ways; didn’t the hardware problems of the machine already make the used market risky enough? Now consumers will be even more wary, losing game sales because less people are buying used consoles.
If you have just the right kernel, and a copy of your CPU key, and a second unbanned Xbox 360, you may be able to reactivate your machine. But how many people have those things available to them? Undoubtedly an Xbox 360’s desirability is greatly diminished if Xbox Live is removed from the equation. This is something Nintendo could learn from when it comes to the Wii (no online multiplayer with New Super Mario Bros Wii?… Really?). So whether you are the one who was banned, or you decided/were tricked in to purchasing a banned console, what are you going to do with it now that online play is out of the picture?
We’ve seen the console emulating SNES games and even XBMC run with the help of Ubuntu. Leave us a comment and tell us if you are planning to just go without Xbox Live, use the machine as a desktop running Ubuntu, or spearhead the effort to repurpose this powerful (and flawed) hardware platform. Will you go out and capitalize on cheaper hardware, or have you been burnt by the grim reality of a crippled rig?
[Harm's] tumbling robot from a few years back is an excellent study in simple motion. Foregoing wheels or legs, he uses four flippers to roll the robot around the room. Two motors are used, each in charge of two flippers. Identical but separate circuits drive the motors with a 74HC240 gate IC monitoring the continuously rotation. When a flipper becomes stuck, the circuit reverses the rotation of the motor so the simple bot can tumble its way out of a jam.
The circuitry is less advanced than some of the BEAM builds we’ve seen before. That doesn’t diminish the cleverness of his design and we think BEAM robotics are great way to get your head out of the computer code and go hardware only. After the break you can take in some video of the tumbling motion. We’ve also included a video of another bot from his website that uses concentric rings for another type of unique locomotion.
Here’s something that the R/C airplane crowd might think of as old news. These directions show us how to rework floppy drive and CD Rom motors to be high power airplane motors. There are several listed, with details on each, but those unfamiliar might want to start with the most basic CD Rom version. It covers winding your own copper and installing the magnets in the “bell”, putting it all together and mounting it. This is a great writeup for those who haven’t seen this done before. If you want something even simpler though, you might enjoy the homopolar motor post. If you’re more advanced, they have tips for you too on machining and balancing the motors as well as winding density.
[Pcmofo] has shared a well-built, well-explained example of how to implement an RFID key system for a door. We call this the right way because it is well thought out and functional. In the past we’ve seen doors that unlock via a secret knock, keypads, and RFID, but they are all non-permanent solutions capable being transplanted from one door to another. Rather than building a mechanism to turn the door handle, this implementation uses an electric strike mounted in the framing of the door to allow access. These are used for security doors in buildings and are built to keep your door secure.
The hack in this case is the electronics. Using an AVR ATmega168 running the Arduino boot-loader, [pcmofo] has prototyped a two-part design. An RFID reader is mounted outside the door with data wires running to the inside where the microcontroller resides. A hard-coded RFID card is used as a “master” to train any number of tags for entry. The master puts the device in training mode and the next tag to be read is added to the list of tags authorized to open the door.
We like messy wires and quickly thrown together devices but this is built to last and will look great once mounted in an appropriate enclosure.
We stumbled onto one of [Nik Melton]’s projects, an Omni-car. It is omnidirectional, meaning it can go any direction at any time without having to turn. The body was designed by him, then printed with a 3D printer. The control scheme is what interests us though. He has found a simple way to wire it to get the job done. Sure you can see that it suffers from some pretty bad “drift” when trying to go in a straight line, but overall, we think he pulled it off well.
You might want to take a few moments to look around his project page. This guy has done a bunch of fun stuff like delta robots, strange hybrid wheel/leg robots, tesla coils, and arm mounted flamethrowers. Judging by the videos, he’s pretty young too. We think his guy has a bright future ahead of him.
We ask, who wouldn’t want a rotating motion and distance tracking radar? Sure in today’s day and age anyone could purchase a wide-angle sonar or IR solution that achieves the same goal, but [LuckyLarry] took it old school and made his own rotating radar. He used an Arduino, servo, and ultrasonic sensor as a base to gather data, and the open source programming language Processing to draw the data on the screen. He says it’s a little inaccurate currently, but will try out some other sensors in the future.
[Spikenzie] is at it again. This time he’s posted a nice USB to serial converter. He points out that you can buy a USB to serial adapter pretty cheaply, but sometimes you want this functionality built into your project enough to justify the greater cost. In those cases where you want to integrate it, this is an elegant solution. This design was made to be fairly compact and still usable on a breadboard. As usual, you can download the files from his website. If his work looks familiar, it’s because we’ve covered his work several times before.
[via Flickr]
© Blogger template Brownium by Ourblogtemplates.com 2009
Back to TOP
